High Strengthened Frame Formwork

High Strengthened Plywood Frame Formwork Hollow Steel Structure GK120

Descrition:

Wall plan

Core tube plan

Characteristics of GK120 series wall formwrok

1, The framed formwork is a hollow steel structure covered with plywood. The plywood is

18 mm thick and in good quality.
2,As a highly standardized system, it is flexible to assemble, and wood batten can be filled in to satisfy

the need for nonstandard size.
3,The formwork is also highly strengthened, and the wall formwork can bear lateral pressure of 60 KN /m2

while the column formwork can support 80 KN /m2.
4,The adjustable clamps are convenient to use and hold firmly.
5,There is a prizing part designed in the corner, which can help to position and remove formwork easily.
6,The formwork is screwed on from the back when connecting frame and plywood, and the surface of the

finished concrete is perfect.
7,The formwork series are a complete system with a full set of accessories, and can be installed flexibly

according to project demand.

1050 series /750 series adjustable column formwork

1050 series /750 series adjustable column formwork are used in the concrete pouring of

square or rectangle column. The largest column dimension is 1050x1050mm and 750x750mm.

Combined the two together, the rectangle column can be done,the largest dimension is 1050x750mm.

Additionally,wood batten(width≤50mm) can be filled in the corner to satisfy the middle dimension.

The sketches are shown below:

C series vertical formwork is the column formwork series. They are matched with column waler.

The cross section sketches are shown below:

Work with other formwork systems

Framed formwork is often used combining with the climbing formwork system or

wall formwork system to substitute the timber beam formwork. Both combinations are acceptable on construction

site.

Project Application